Shop
-
10AN Aluminum Baffled Oil Catch Can with Drain Valve 2 Ports Brushed Reservoir Tank with Breather Filter 750ml
Oil Catch Can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine.
All oil vapor expelled by your turbo charged motor before it can harm your cars performance keeps the engine clean even under hard driving conditions.
The catch can will keep out the Dirt And Oil Get Inside Your Engine from your intake system,Increases horsepower and Prolongs your engine lifeFeatures:
Anodized Body
Universal fitment, suitable for most vehicles
Made of T6061 Aluminum and TIG welded.
Ensure Better Mileage, Better Performance and Preserve Engine Life
10AN inlet and outlet fittings for easy leak-proof installation
The port at the top of the can is a tube which has internal baffling built into it, this will prevent oil from escaping
Drain plug at the bottom for easy draining and cleaning
The bracket is formed with an extrusion for superior mounting strength and durability
Hose Clamp:Prevent Filter from loosing When Vibrating
Removable Bottom to DrainSpecification:
Diameter: 76mm (3 Inches)
Height: 267mm (10.5 Inches) incl. Filter
Inlet/Outlet Size:2*10AN Vertically aligned on the same side
Capacity: 750ml ( 0.75L)
Colour: Silver
Material: T6061 AluminumPackage Includes:
1x Oil Catch Can Breather Tank
1x Breather Filter with Clamp 1x Hose Clamp
1x Drain Valve with O-ringPowdered in color of choice , Candy’s and special powders are an additional $25
3rd Link 2nd Gen.. Mazda mx6/626 Ford Probe
If you’re looking to repair and fix the rusted shift linkage then you will need our 3rd link to replace the non serviceable pin. They are made from a bronzoil bushing and the kit comes with what u will need for the replacement.
88-92 F2T INTAKE DECAL
We offer a new look to that tired out engine bay with the new intake decal. If you have recently cleaned or painted or even powdered coated parts in the bay then spend the little extra and get a new decal for your intake to bring life back to it.
Colors are available: inquire within.
88-92 Probe/Mx6 92-97 MX3 Shifter Bushing Kit
Our shifter bushing kits come 1pc kits or 2pc kits and 3pc kits depending on what you might need, our kits replace the stock plastic bushings with oil impregnated bronzoil bushings. We also include brand new hardware with our kits. The 3rd link bushing will need to be drilled and punched out as it is a non-serviceable link, as seen it the pics.
Note: When installing please add a little Loctite 242 to help vibration working the lock nuts loose.
88-93 Ford Festiva Shifter Bushing Kit
Our shifter bushing kits come 1pc kits or 2pc kits and 3pc kits depending on what you might need, our kits replace the stock plastic bushings with oil impregnated bronzoil bushings. We also include brand new hardware with our kits. The 3rd link bushing will need to be drilled and punched out as it is a non-serviceable link, as seen it the pics.
Note: When installing please add a little Loctite 242 to help vibration working the lock nuts loose.
93-97 FORD PROBE GT DOOR CAP DECAL
Looking to repaint or to just freshen uo the look of your probe , or maybe add some new colors to the outside styling , well let us help create the look you are looking for. here at Exile we offer a wide variety of color options and styles for you.
COLORS: Black , Silver and etched are in stock right now.
93-97 Ford Probe T-Shirt
Old design brought back with slight changes for the Probe Nation shirts. Various colors and sizes are availibable. We use Hanes beefy or Gildan shirts , we also try to have the preshrunk ones on hand if possible. shirts normally takes a few days to make as we do make all shirts to special order.
Colors: Any color
Sizes: xs-5xl
*Please note sizes over xl are an additional charge.
93-97 MAZDA MX6 DASH LED KIT
OUR KITS ARE MADE FOR THE MAIN ILLUMINATION OF THE CLUSTER, WE HAVE SEVERAL COLORS AVAILABLE. LEDs ARE POLARITY SENSITIVE SO BE SURE TO CHECK THEM AFTER THE INSTALL
93-97 Probe/Mx6 Shifter Bushings
Our shifter bushing kits come 1pc kits or 2pc kits depending on what you might need, our kits replace the stock plastic bushings with oil impregnated bronzoil bushings. We also include brand new hardware with our kits. On the shifter side of the shift rod, one side will need to be drilled out to a 3/8 hole to accommodate the new hardware.
Note: When installing please add a little Loctite 242 to help vibration working the lock nuts loose.
SOLD OUT 97 FORD PROBE GTS PACKAGE DOOR CAP DECAL
Looking to repaint or to just freshen uo the look of your probe , or maybe add some new colors to the outside styling , well let us help create the look you are looking for. here at Exile we offer a wide variety of color options and styles for you.
COLORS: OUT OF STOCK
Aluminum 10AN Oil Catch Can Reservoir Tank W/ Breather Filter Baffled
Product Description
- This oil catch can will collect oil and moisture blow by gases from PCV valve or engine VALVE COVER ports going to intake system that causes carbon and sludge build-up in the intake system and engine.
- With this oil catch can you keep your engine clean under hard driving conditions.
- Allowing “cleaner” gases to be passed back into the intake.
- It will remove carbon and sludge build-up in the intake system, prolong engine longevity, increase engine performance.
- Easy to clean, empty and maintain, visual fluid level shows when to empty the catch tank.
Product Features
- 100% Brand New
- 0.75L Oil Catch Can
- Total Height: 8.4″
- Tube Diameter: 3″
- Bracket Wide: 0.8″
- The 2 front ports are -10 AN threaded for various types of connections/configurations
- The port at the top of the can is a tube which has internal baffling built into it
- This will prevent oil from escaping and remaining inside the catch can
- Fully Tig Welded
- Bracket is formed with an extrusion for superior strength and durability
- Catch Can has a Brushed Finish
- A 3/8″ drain valve is included
- Chrome Filter included
- Professional Installation is Highly Recommended (No Instruction Included)
Package Includes
- 1X Oil Catch Tank
- 1 x Air Filter
- 2X Adapters
- 1x Bracket
- Powdered in choice of colors
- Candy’s and Two color powders are an additional cost of $25
CUSTOM HANDMADE WEIGHTED SHIFT KNOBS
Custom one off weighted shift knobs. Made to order, Each knob weight around 8oz unless you want heavier or lighter. Turn around time is about a week depending whats going on in the shop at that time. If you would like one please contact us and we can set something up with you. DOME/MAP LED LIGHT KIT
BRIGHTEN UP YOUR INTERIOR WITH OUR DOME/MAP LED KIT. INCANDESCENT BULBS ARE DULL AND NOT VERY BRIGHT. OUR WHITE WILL LIGHT UP THE WHOLE CAR , SO AT NIGHT WHEN YOU NEED TO FIND LET’S SAY THAT REGISTRATION, THERE WON’T BE AN ISSUE LOCATING IT. WE ALSO OFFER IN A RANGE OF COLORS.
